Clarion DXZ848RMC Manuel du propriétaire télécharger pdf (Page 19)

DXZ848RMC 27

English

Operations Common to Each Mode

Dimmer control

You can setting the dimmer control “ON” or

“OFF”.

∗ The factory default setting is “ON”.

1. Press and hold the [T] button for 1 second or

longer to switch to the adjustment selection

display.

2. Press the [a] or [d] button to select “DIM-

MER”.

3. Turning the [ROTARY] knob clockwise or

counterclockwise and select “ON” or “OFF”.

4. Press the [T] button to return to the previous

mode.

Dimmer in control

You can setting the dimmer in control AUTO or

ILLUMI.

∗ The factory default setting is “DMR-IN AUTO”.

1. Press and hold the [T] button for 1 second or

longer to switch to the adjustment selection

display.

2. Press the [a] or [d] button to select “DIM-

MER IN”.

3. Turning the [ROTARY] knob clockwise or

counterclockwise and select “DMR-IN AUTO”

or “DMR-IN ILLM”.

4. Press the [T] button to return to the previous

mode.

Adjusting the display contrast

You can adjust the display contrast to match the

angle of installation of the unit.

∗ The factory default setting is “8”. (Adjustment

level:1to 16)

1. Press and hold the [T] button for 1 second or

longer to switch to the adjustment selection

display.

2. Press the [a] or [d] button to select

“CONTRAST”.

3. Turning the [ROTARY] knob clockwise or

counterclockwise to adjust the contrast.

4. Press the [T] button to return to the previous

mode.

Anti-theft indicator

The red Anti-theft indicator is a function for pre-

venting theft. When the DCP is removed from

the unit, this indicator blinks.

∗ The factory default setting is “OFF”.

1. Press and hold the [T] button for 1 second or

longer to switch to the adjustment selection

display.

2. Press the [a] or [d] button and select

“BLINK LED”.

3. Turning the [ROTARY] knob clockwise to set

this function “ON” or turn it counterclockwise

to switch this function “OFF”.

4. Press the [T] button to return to the previous

mode.

Setting the Subwoofer

∗ The factory default setting is “SUB-W ON”.

1. Press and hold the [T] button for 1 second or

longer to switch to the adjustment selection

display.

2. Press the [a] or [d] button and select

“SUB-WOOFER”.

3. Turning the [ROTARY] knob clockwise or

counterclockwise and select “ON” or “OFF”.

4. Press the [T] button to return to the previous

mode.

Setting LOW PASS FILTER

∗ The factory default setting is “THRGH”.

1. Press and hold the [T] button for 1 second or

longer to switch to the adjustment selection

display.

2. Press the [a] or [d] button and select

“SUB-W LPF”.

3. Turning the [ROTARY] knob clockwise or

counterclockwise to select the setting. Each

time you turning the [ROTARY] knob, the set-

ting changes in the following order:

THRGH ➜ 50 Hz ➜ 80 Hz ➜ 120 Hz

4. Press the [T] button to return to the previous

mode.

Setting the external amplifier

∗ The factory default setting is “OFF”.

1. Press and hold the [T] button for 1 second or

longer to switch to the adjustment selection

display.

2. Press the [a] or [d] button and select

“AMP CANCEL”.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 31 32

Commentaires sur ces manuels

Pas de commentaire