Clarion VXZ768R Manuel du propriétaire télécharger pdf (Page 8)

16 VXZ768R

English

7. OPERATIONS

Basic Operations

Note:

•

Be sure to read this chapter referring to the front diagrams of chapter “2. CONTROLS” on page 5 (unfold).

CAUTION

Be sure to lower the volume before

switching off the unit power or the ignition

key. The unit remembers its last volume

setting. If you switch the power off with the

volume up, when you switch the power back

on, the sudden loud volume may hurt your

hearing and damage the unit.

System check and speaker setting

During the initial power up of this unit, it will go

through a system check procedure.

This procedure verifies any devices connected

through CeNET. Any additional CeNET devices

plugged into the unit after the initial power up

will initiate the system check procedure.

1. When the power is turned on,

“SYSTEM”

appears in the display if the wire connections

were modified.

The system check starts automatically within

the unit.

2. When the system check is complete,

“SP-SET” appears in the display. Perform the

speaker setting.

3. Turn the [ROTARY] knob to select the

speaker system.

• The factory default setting is “2ch”. (Adjustment

2ch/5.1ch)

• To enjoy 5.1ch surround sound more effectively,

we recommend equipment of the center speaker

and the sub-woofer.

4. Press the [ ] button.

• The setting is complete and the display switches

to the radio mode.

Turning on/off the power

Note:

•

Be careful about using this unit for a long time

without running the engine. If you drain the car’s

battery too far, you may not be able to start the

engine and this can reduce the service life of the

battery.

1. Press the [SRC] button.

2. The illumination and display on the unit light

up. The unit automatically remembers its last

operation mode and will automatically switch

to display that mode.

3. Press and hold the [SRC] button for 1 second

or longer to turn off the power for the unit.

Selecting a mode

1. Press the [SRC] button to change the

operation source mode.

2. Each time you press the [SRC] button, the

operation mode changes in the following

order:

Radio mode ➜ (DAB mode) ➜ DVD mode

➜ (CD changer mode) ➜ (TV mode) ➜

AUX mode ➜ Radio mode...

• External equipment not connected with CeNET is

not displayed.

Adjusting the volume

1. Turn the [ROTARY] knob to adjust the

volume.

• The volume level is from 0 (minimum) to 33

(maximum).

Switching the display

1. Each time you press the [DISP] button, the

display switches in the following order:

Main display ➜ Clock display ➜

Main display...

• Once selected, the preferred display becomes the

display default. When a function adjustment such

as volume is made, the screen will momentarily

switch to that function’s display, then revert back to

the preferred display several seconds after the

adjustment.

1. Press and hold the [DISP] button for 4

seconds or longer to turn off the display.

2. To turn on the display, press the [DISP]

button again.

VXZ768R.book Page 16 Tuesday, December 27, 2005 10:08 PM

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 49 50

Commentaires sur ces manuels

Pas de commentaire

Clarion VXZ768R Manuel du propriétaire Page 8

Commentaires sur ces manuels

Produits connexes et manuels pour Lecteurs de DVD Clarion VXZ768R