Clarion DXZ656MP Manuel d'utilisateur télécharger pdf (Page 12)

12 DXZ656MP

280-8166-00

English

7. OPERATIONS

Basic Operations

Note:Be sure to read this chapter referring to the front diagrams of

chapter “3. CONTROLS” on page 5 (unfold).

CAUTION

Be sure to lower the volume before

switching off the unit power or the ignition

key. The unit remembers its last volume

setting. If you switch the power off with the

volume up, when you switch the power back

on, the sudden loud volume may hurt your

hearing and damage the unit.

Turning on/off the power

Note:

• Be careful about using this unit for a long time

without running the engine. If you drain the car’s

battery too far, you may not be able to start the

engine and this can reduce the service life of the

battery.

1. Press the [SRC] button.

2. The illumination and display on the unit light

up. The unit automatically remembers its last

operation mode and will automatically switch

to display that mode.

3. Press and hold the [SRC] button for 1

second or longer to turn off the power for the

unit.

Note:

• System check

The first time this unit is turned on after the wire

connections are completed, it must be checked

what equipment is connected. When the power is

turned on, the “SYSTEM CHECK” appears in the

display, then the unit returns to the clock display

mode. The system check starts within the unit.

When the system check is complete, press the

[SRC] button again.

Selecting a mode

1. Press the [SRC] button to change the

operation mode.

2. Each time you press the [SRC] button, the

operation mode changes in the following

order:

Radio mode ➜ CD/MP3/WMA mode ➜ CD

changer mode ➜ DVD changer mode ➜ TV

mode ➜ AUX mode ➜ Radio mode...

∗ External equipment not connected with

CeNET is not displayed.

Adjusting the volume

1. Press the front part of the [ROTARY] knob.

The knob will pop up.

2. Turning the [ROTARY] knob clockwise

increases the volume; turning it

counterclockwise decreases the volume.

∗ The volume level is from 0 (minimum) to 33

(maximum).

Switching the display

Press the [D] button to select the desired

display.

Each time you press the [D] button, the display

switches in the following order:

Spectrum analyzer

display

• Main display

• Sub display

• Title display

Level bar display

∗ In the case of a user title, only the top level is

displayed.

∗ In the case of radio/TV/AUX/DVD changer, the

display cannot be switched to “title display.”

∗ Once selected, the preferred display becomes

the display default. When a function adjustment

such as volume is made, the screen will

momentarily switch to that function’s display,

then revert back to the preferred display

several seconds after the adjustment.

∗ If the button operation is performed with the

screen saver function on, the operation

display corresponding to the button operation

is shown for about 30 seconds and the display

returns to the screen saver display.

For details, refer to the subsection “Turning the

screen saver function on or off” in section

“Operations Common to Each Mode.”

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 28 29

Commentaires sur ces manuels

Pas de commentaire

Clarion DXZ656MP Manuel d'utilisateur Page 12

Commentaires sur ces manuels

Produits connexes et manuels pour Lecteurs de CD Clarion DXZ656MP