Clarion ProSecurity RK20 Guide d'installation télécharger pdf (Page 20)

As shipped, this wire should be connected to the (+) parking light wire. If the light flash polarity jumper under

the sliding door is moved to the opposite position (see Internal Programming Jumper section of this guide), this

wire supplies a (-) 200 mA output. This is suitable for driving (-) light control wires in Toyota, Lexus, BMW, some

Mitsubishi, some Mazda, and other model cars.

(+) Positive Light Flash Output

(-) Light Flash Output

NOTE: For parking light circuits that draw 10 amps or more, the internal jumper must be switched

to a (-) light flash output. (See the Internal Programming Jumper section of this guide.) P/N 8617

or a standard automotive SPDT relay must be used on the H1/2 light flash output harness wire.

H1/11 WHITE (+/-) selectable light flash output

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 59 60

Pas de commentaire

Clarion ProSecurity RK20 Guide d'installation Page 20