Clarion DXZ535 Manuel du propriétaire télécharger pdf (Page 10)

DXZ535 19

English

18 DXZ535

English

Operations Common to Each ModeOperations Common to Each Mode

Turning the screen saver function

on or off

This unit is provided with the screen saver func-

tion which allows you to show various kinds of

patterns and characters in the Operation Status

indication area of the display in a random order.

You can turn on and off this function.

If the button operation is performed with the

screen saver function on, the operation display

corresponding to the button operation is shown

for about 30 seconds and the display returns to

the screen saver display.

∗ The factory default setting is “SS”.

1. Press and hold the [T] button for 1 second or

longer to switch to the adjustment selection

display.

2. Press the [a] or [d] button to select

“SCRN SVR”.

3. Press the [ ] button.

4. Turn the [ROTARY] knob clockwise or coun-

terclockwise to select the setting. Each time

you turn the [ROTARY] knob, the setting

changes in the following order:

OFF ➜ SS ➜ MESSAGE

5. Press the [ ] button to store the setting.

6. Press the [T] button to return to the previous

mode.

∗ The following illustration presents one of the

patterns which are shown when the screen

saver function is turned on.

Entering MESSAGE INFORMATION

Message up to 30 characters long can be stored

in memory and displayed for any mode.

*The factory default setting is “WELCOME TO

CLARION”.

1. Press and hold the [T] button for 1 second or

longer to switch to the adjustment selection

display.

2. Press the [a] or [d] button to select “IN-

PUT”.

3. Press the [ ] button.

4. Press the [a] or [d] button to move the

cursor.

5. Press the [D] button to select a character.

Each time you press the [D] button, the char-

acter changes in the following orders:

Numbers ➜ Symbols ➜ Capital letters ➜

Numbers…

6. Turn the [ROTARY] knob to select the de-

sired character.

7. Repeat step 4 to 6 to enter up to 30 charac-

ters for message.

8. Press and hold the [ ] button for 2 sec-

onds or longer to store the message in

memory and cancel input message.

9. Press the [T] button to return to the previous

mode.

Setting the method for title scroll

Set how to scroll in CD-TEXT or MD.

∗ The factory default setting is “ON”.

1. Press and hold the [T] button for 1 second or

longer to switch to the adjustment selection

display.

2. Press the [a] or [d] button to select

“SCROLL”.

3. Turn the [ROTARY] knob clockwise or coun-

terclockwise and select “ON” or “OFF”.

● ON:

To scroll automatically.

● OFF:

To scroll just 1 time when the title was

changed or the title key was pressed.

4. Press the [T] button to return to the previous

mode.

Dimmer control

You can set the dimmer control on or off.

∗ The factory default setting is “ON”.

1. Press and hold the [T] button for 1 second or

longer to switch to the adjustment selection

display.

2. Press the [a] or [d] button to select “DIM-

MER”.

3. Turn the [ROTARY] knob clockwise to “ON”

or counterclockwise to “OFF”.

4. Press the [T] button to return to the previous

mode.

Adjusting the display contrast

You can adjust the display contrast to match the

angle of installation of the unit.

∗ The factory default setting is “5”. (Adjustment

level:1to 8)

1. Press and hold the [T] button for 1 second or

longer to switch to the adjustment selection

display.

2. Press the [a] or [d] button to select “CON-

TRAST”.

3. Turn the [ROTARY] knob clockwise or coun-

terclockwise to adjust the contrast.

4. Press the [T] button to return to the previous

mode.

Setting LOW PASS FILTER

This function allows you to set the low-pass filter

sub-woofer output.

∗ The factory default setting is “LPF 120”.

1. Press and hold the [T] button for 1 second or

longer to switch to the adjustment selection

display.

2. Press the [a] or [d] button to select “SW

LPF”.

3. Turn the [ROTARY] knob clockwise or coun-

terclockwise to select the setting. Each time

you turn the [ROTARY] knob, the setting

changes in the following order:

REAR ➜ LPF 50 ➜ LPF 80 ➜ LPF 120

4. Press the [T] button to return to the previous

mode.

Selecting AUX IN sensitivity

Make the following settings to select the sensi-

tivity when sounds from external devices con-

nected to this unit are difficult to hear even after

adjusting the volume.

∗ The factory default setting is “MID”.

1. Press and hold the [T] button for 1 second or

longer to switch to the adjustment selection

display.

2. Press the [a] or [d] button to select “AUX

SENS”.

3. Turn the [ROTARY] knob clockwise or coun-

terclockwise as needed and select from

“HIGH”, “MID” or “LOW”.

4. Press the [T] button to return to the previous

mode.

Setting the clock

1. Press and hold the [T] button for 1 second or

longer to switch to the adjustment selection

display.

2. Press the [a] or [d] button to select

“CLOCK”.

3. Press the [ ] button.

4. Press the [a] or [d] button to select the

hour or the minute.

5. Turn the [ROTARY] knob clockwise or coun-

terclockwise to set the correct time.

∗ The clock is displayed in 12-hour format.

6. Press the [ ] button to store the time into

memory.

7. Press the [T] button to return to the previous

mode.

Note:

•You cannot set the clock when it is displayed with

only the ignition on. If you drain or remove the

car’s battery or take out this unit, the clock is re-

set. While setting the clock, if another button or

operation is selected, the clock set mode is can-

celed.

Setting the button illumination

Press the [COLOR] button to select a color

type. Each time you press the [COLOR] button,

the type changes in the following order:

CLR SCAN ➜ RED ➜ MANDARIN ➜ OR-

ANGE ➜ AMBER ➜ YELLOW ➜ Y-GREEN ➜

LIME ➜ GREEN ➜ D-GREEN ➜ USER ➜ CLR

SCAN…

● Setting CLR SCAN mode

As selecting “CLR SCAN”, the color automati-

cally changes in the following order:

RED ➜ MANDARIN ➜ ORANGE ➜ AMBER ➜

YELLOW ➜ Y-GREEN ➜ LIME ➜ GREEN ➜

D-GREEN ➜ RED…

∗ The factory default setting is “CLR SCAN”.

∗ During change the color’s name is not appear.

∗ After 3 second the color changes to the other.

● Setting USER mode

The factory default setting is “R>8 G>3”.

As selecting “USER”, press and hold the

[COLOR] button 1 second or longer “R>8 G>3”

appears in the display.

1. Press the [a] or [d] button to move the

cursor.

2. Turn the [ROTARY] knob clockwise or coun-

terclockwise to select from 0 to 8.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15

Commentaires sur ces manuels

Pas de commentaire

Clarion DXZ535 Manuel du propriétaire Page 10

Commentaires sur ces manuels

Produits connexes et manuels pour Lecteurs de CD Clarion DXZ535