Clarion CX501 Manuel d'utilisateur télécharger pdf (Page 10)

Basic Operations

English

10 CX501

3-1. Each time you turn the [ROTARY] knob,

the tone effect changes in the following

order:

“CUSTOM”

“EXCITE” “IMPACT”

“B-BOOST”

“OFF”

CUSTOM : user custom

EXCITE : bass and treble emphasized

mid emphasized

IMPACT : bass and treble emphasized

B-BOOST : bass emphasized

OFF : no sound effect

When “CUSTOM” is set:

3-1. Press the [ROTARY] knob.

3-2. Press the [x] or [v] button to select the

“BASS”, “MID” or “TREBLE” mode to adjust.

3-3. If you want to set the flat, press the

[ROTARY] knob to return to the “CUSTOM”

mode, then press and hold the [ROTARY]

knob (1 sec.), bass/mid/treble

characteristics become flat and switch to

the “CUSTOM” mode.

When “EXCITE/IMPACT/B-BOOST” is set:

3-1. Press the [ROTARY] knob.

3-2. Turn the [ROTARY] knob to adjust the

setting in the range of -3 to +3.

∗ The factory default setting is “0”.

3-3. Press the [ROTARY] knob to return to the

previous mode.

Adjusting the BASS/MID/TREBLE

This adjustment can be performed only when

the BEAT EQ is set to “CUSTOM”.

Note:

• While connected with the external amplifiers,

please do not set the “BASS/MID/TREBLE” in

the maximum level. Otherwise the speakers may

be damaged.

3-1. Press the [ROTARY] knob.

3-2.

Press the [x] or [v] button

to select as

following order:

“BASS<G>”

“BASS<F>”

“BASS<Q>” “MID<G>” “MID<F>”

“MID<Q>” “TREBLE<G>”

“TREBLE<F>”

“TREBLE<Q>”

∗ The factory default setting is “BASS G”.

3-3. Turn the [ROTARY] knob to select the

setting.

BASS<G>:The factory default setting is “0”.

(Adjustment range: +7 to –7)

BASS<F>:

The factory default setting is “

50

”.

(Adjustment range: 50/100/200)

BASS<Q>:The factory default setting is “1”.

(Adjustment range: 0.7/1/1.4/2)

MID<G> : The factory default setting is “0”.

(Adjustment range: +7 to -7)

MID<F> :

The factory default setting is “

500

”.

(Adjustment range: 500/1K/2K)

MID<Q> :

The factory default setting is

“1”

.

(Adjustment range: 0.7/1/1.4/2)

TREBLE<G>

:

The factory default setting is

“

0

”

.

(Adjustment range: +7 to -7)

TREBLE<F>:

The factory default setting is

“

10K

”.

(Adjustment range: 5K/10K/15K)

TREBLE<Q>

:

The factory default setting is

“

1

”

.

(Adjustment range: 0.7/1/1.4/2)

3-4. Press the [ROTARY] knob to return to the

previous mode.

Setting the MAGNA BASS EXTEND

The MAGNA BASS EXTEND does not adjust

the low frequencies like the normal sound

adjustment function, but emphasizes the deep

bass frequencies to provide you with a dynamic

sound.

∗ The factory default setting is “OFF” (off).

2-1. Select “M-B EX”.

3-1. Turn the [ROTARY] knob to select “ON” or

“OFF”.

Adjusting the balance

2-1. Select “BALANCE”.

3-1. Turn the [ROTARY] knob to adjust the

balance of the right and left speakers.

∗ The factory default setting is “CENTER”

(center). (Adjustment range: RIGHT12 to

LEFT12 (right 12 to left 12))

Adjusting the fader

2-1. Select “FADER”.

3-1. Turn the [ROTARY] knob to adjust the

balance of the rear and front speakers.

∗ The factory default setting is “CENTER”

(center). (Adjustment range: FRONT12 to

REAR12 (front 12 to rear 12))

Setting the subwoofer

You can set the low pass filter of subwoofer.

2-1. Select “LPF”.

CX501_ENG.book Page 10 Thursday, November 4, 2010 3:55 PM

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 36 37

Commentaires sur ces manuels

Pas de commentaire